Ghost Immobiliser Fitting
Guard your car from key theft, cloning and hacking with the world's first aftermarket CAN immobiliser. With the additional option of connecting to an Ghost app and GPS tracking system that can send you alerts to call in the event that your vehicle is damaged with or stolen.
The installation of the Ghost immobiliser can be done by a qualified technician. Making use of the correct tools, insulation tape, and heat shrink tubing is crucial.
Getting Started
Ghost immobilisers can be a great alternative to physical theft devices like car alarms and wheel locks. They safeguard your vehicle without the use of LED indicators or key fobs. Instead they connect directly to the ECU's CAN data network and can only be started after entering a PIN sequence. ghost immobiliser 2 provides a much more secure level of security against key hacking, cloning and even ECU swapping.
As a result, installing a ghost immobiliser Birmingham must be completed with a high degree of agility and precision. It's like navigating an icy minefield. One mistake could cause irreparable damage to the circuits of your vehicle's electrical system. To avoid this, it's vital that you know the procedure for installing and prepare your vehicle for the installation process.
First, you need to prepare the vehicle by taking out interior panels to allow for the immobiliser device. Once you've found the perfect place to conceal it and secure it using cable ties to prevent it from being removed or tampered with. Next, tidy up the wiring by tying loose wires and utilizing insulation tape or heat shrink tubing to cover the exposed connections. This will reduce the risk of a short circuit that is not intended to happen while also improving the appearance and reducing the chances of theft.
Find a source of continuous 12V power as well as a grounding point for the ghost immobiliser. Once you have found them check the power cables using a multimeter. Finally, connect the CAN H and CAN L wires from the immobiliser to your chosen power source and the grounding point.
It is essential to check all connections and inspect the immobiliser to look for indications of corrosion. By entering a PIN and then starting the car is a good method to test the system. This should be an ongoing part of your routine since it can help you spot any intermittent issues early. Regular testing will help to increase the longevity of your device, and keep it performing at its best.
Preparing the vehicle
The installation of an Ghost immobiliser can be a difficult job that requires the appropriate tools and expertise. A wiring diagram is crucial to identify the right wires, making accurate connections, and ensuring safety. A multimeter is a tool to test electrical values and ensure security. Insulation tape and cable ties can be used to protect the connections from tampering and to ensure they are secured. Additionally, a user's guide will provide specific directions specific to the Ghost Immobiliser model you have.
Once installed the ghost immobiliser will stop an unauthorised engine from starting by requiring that the owner enter a unique PIN sequence through existing buttons in the steering wheel or center console. The code can be altered at anytime by the vehicle owner, either manually or remotely through a mobile app. The device is also quiet and unnoticeable by thieves since it doesn't emit any radio frequencies.
Ghost immobilisers are directly connected to the CAN bus of the vehicle, a network that communicates with the electronic control units (ECUs) of the vehicle. It intercepts the signals transmitted by ECUs and shuts down the engine when a false signal is detected. The system is weatherproof and tamper proof. It does not have LED indicators or keys to attract thieves' attention.
It can be mounted behind or in a less visible area to ensure that it isn't easily spotted by thieves and doesn't interfere with the vehicle performance. It can even be mounted in a small container and makes it less likely to be spotted during an inspection by unscrupulous salespeople selling cars.
Its discrete operation and integration with the vehicle's CAN bus system make it a powerful deterrent to modern methods of theft, such as key cloning and signal relay attacks. The system can be combined with other security measures to create a powerful barrier that can deter even the most persistent thieves. A growing number of insurance companies recommend or even require ghost immobilisers as they can lower monthly premiums.
Making Connections
Unlike traditional security systems that can be heard by thieves, ghost immobilisers are silent and stop them from knowing that your vehicle is turned on. They also block high-tech methods employed to steal vehicles, like OBD port hacking. They can also be installed without leaving permanent marks on your car making them a good option for those who are planning to sell their car in the near future.
The Autowatch Ghost 2 is a immobiliser for CANbus that is one of the most reliable and current solutions to prevent car theft. It disables your engine using the CAN data network and generates a unique PIN number which is difficult to steal from criminals. It can be used on various vehicles, and it works with all the features that are already in place including car alarms, steering wheel locks, GPS trackers and door lock bypass.
If you opt to use an Ghost immobiliser for your vehicle, make sure to refer to the wiring schematic to identify the wires that connect. Verify the location of these wires to ensure that they are in the correct location and mark them using tape or labels to aid in keeping on track of them. You will also have to locate a consistent power source (12V) for the system and an earthing. Once you have all the required components, you can start connecting them to complete the installation.
When the ghost immobiliser is connected to the CAN bus, it will prevent your vehicle from starting unless you enter a pin code using the buttons on the steering wheel or dashboard. This will stop ECU hacking, key cloning, and other methods of theft. It can also be paired with other Thatcham approved security accessories such as alarms or tyre clips to provide your vehicle with an even higher security level.
As the UK automotive industry continues to expand, so do the options available for protecting your vehicle. With so many avenues for thieves to gain access and steal your car it's essential to take every precaution to ensure it isn't stolen. Ghost immobilisers are an increasingly popular option for car owners who are responsible.
Testing the System
The Ghost Immobiliser uses a CAN data network to communicate with the vehicle's ECU which stops the engine from running until a specific PIN code is entered. This makes it very difficult for thieves to copy the key fob of your car and start your car, and even more difficult to disable the system through hacking into its electronic components.
Ghost Immobilisers can also be used with GPS tracking devices to help locate your vehicle if it's stolen. This feature is not commonly found in security products that are sold aftermarket however it's an excellent option to boost your vehicle's security and give you peace of mind.
In addition to offering enhanced security, the Ghost-II immobiliser provides a simple user experience by removing the need for additional key fobs and devices. It comes with a simple and intuitive PIN code entry system that seamlessly into your everyday routine. It also offers deactivation modes and convenience features that allow you to temporarily disable the immobiliser valet parking and servicing.
Before beginning the installation process, familiarise yourself with your vehicle's wiring and prepare the necessary tools. A basic set of hand tools will provide you with the flexibility to create precise connections, while a multimeter can help determine electrical values. Insulation tape and heat shrink tubing are essential for protecting connections from short circuits and cable ties can be used to keep the wiring in the right place. It is also essential to work in a space that is well-lit, and wear protective gear when working with electrical tools and components.
After you've completed the installation you must test the Ghost immobiliser to ensure that it's working as intended. You should first try to start the car without entering the PIN. If this fails, you will need to test again and examine the connections more carefully.
The Ghost Immobiliser, unlike other security systems, is a secret device which cannot be identified by thieves. It is also more effective than physical deterrents like wheel clamps and steering locks. It is TASSA acknowledged and approved by some insurance companies, which makes it an investment that is cost-effective and will give you the peace of mind you deserve.
